Choose your language:

Nexum is your reliable partner for energy chains from idea to installation. From simple stock parts to demanding custom applications. We will be glad to assist you with your demands.

Cable Entry Systems 

Catalogues and leaflets:

 

 

SES Sterling Grommets and Bushes

Rubber Grommets

 

Grommets are generally flared or collared on each side to keep them in place and are often made of metal, plastic or rubber. They may be used to prevent tearing or abrasion of the pierced material or protection from abrasion of the insulation on the wire, cable, line being routed through the penetration and to cover sharp edges of the piercing, or all of the above.

Our main partner for grommets and bushes is SES Sterling. You can choose from different materials:

  • Polychloroprene rubber

  • Plioprene TPE

  • Flexible PVC

Installation Cable Glands

 

Cable glands are mechanical cable entry devices that can be made of metallic or non-metallic materials. They are used throughout a number of industries in conjunction with cable and wiring used in electrical instrumentation and automation systems. They work as sealing and termination devices to ensure that the characteristics of enclosures which the cables enter can be maintained adequately.

For general installations and light industry use, we offer different Syntec series of cable glands and accessories.

Syntec® nickel-plated brass cable glands with lamellar technology are part of AGRO extensive range of solutions for rugged, secure cable insertion. Thanks to the patented lamellar geometry of Syntec® cable glands, it is possible to insert different diameters of cable in the same cable gland easily, flexibly and with a good seal. Syntec® cable glands by AGRO are recommended as a secure solution for everyday use.

Syntec cable glands features:

  • Lamellar insert of PA 6 to UL 94 V2

  • With short or long entry thread

  • TPE sealing ring with good chemical resistance

  • Standard or reducing sealing rings

  • Strain relief and anti-torsion device

  • Protection class IP 68

  • Tested to EN 50262 (metric types)

  • Halogen free

Our main partner for cable glands is Agro AG, a leading international supplier of cable glands. Agro AG manufactures cutting edge products and custom-made solutions as well as services for electrical installations and industrial applications.

Catalogues and leaflets:

 

Agro Syntec Cable Glands Brochure

+ Accessories

+ Accessories

Industrial Cable Glands

 

Cable glands are mechanical cable entry devices that can be made of metallic or non-metallic materials. They are used throughout a number of industries in conjunction with cable and wiring used in electrical instrumentation and automation systems. They work as sealing and termination devices to ensure that the characteristics of enclosures which the cables enter can be maintained adequately. Cable glands may be used on all types of electrical power, control, instrumentation, data and telecommunications cables as well as pneumatic and other hoses and protective conduits.

Cable glands Progress® nickel-plated brass are tried and tested aids for correct cable entry in industrial equipment. If the correct choice with the right sealing insert, these glands can be used anywhere. The outstanding compression technology for use everywhere guarantees an effective seal and excellent cable-protecting strain relief, also by vibrations. AGRO Progress® metal cable glands equipped with sealing inserts made of a special TPE are certified according to EN 45545 und can be used with confidence for any rolling stock application.

We offer different types of cable glands and complementary products:

  • Metallic and plastic cable glands for standard and Ex applications

  • EMC cable glands

  • Pressure balance elements

  • Reducers and adapters

  • Rubber cable grommets
     

Main advantages of AGRO Progress line:

  • Short, long or special entry thread: Cable glands Progress® with short or long entry thread designed as metric, Pg, imperial or NPT can be used with existing opening threads or with a counter nut.

  • Visible safety: The small bead in the sealing insert confirms the correct tightening torque.

  • High distortion protection: The integrated retaining grooves in the lower part and in the sealing insert grant against twisting.

  • Great flexibility: It only takes a few seconds to adapt the two-part sealing inserts on site to the existing cable diameters.

  • Guaranteed seal: Inner contours matched to the sealing insert ensure a targeted deformation of the insert and thus guarantee its tightness in compliance with protection class IP 68 up to 10 bar and IP 69K for a wide range of applications.

 

Our main partner for cable glands is Agro AG, a leading international supplier of cable glands. Agro AG manufactures cutting edge products and custom-made solutions as well as services for electrical installations and industrial applications.

Split Cable Entry systems for Cables with Connectors

 

We offer modular cable entry solutions for entering pre-terminated cables, special-shaped cables and large amounts of cables in confined spaces.

The basic product group is cable entry system KEL for entering cables with connectors and sealing ready – connected applications. It consists of a split frame and several slit cable grommets. During the assembly the slit grommet matching the cable diameter is placed around the cable and inserted into the frame. The grommet is now securely fixed inside the frame and can’t fall out. Once the lid is fixed to the base frame, it is compressed and tightly sealed. The high compression pressure ensures strain relief according to EN 62444 and certified sealing rates up to IP65 / NEMA type 4x.

The icotek cable entry systems comply with important approvals and standards like flame class UL94-V0, IP rated protection, UL, NEMA, German Lloyd, ECOLAB detergent resistance or the European railway standard EN 45545-2 for fire safety and are therefore suitable for various industries.

Our main partner for cable entry systems is Icotek, highly innovative leader in cable entry solutions.

Cable Entry Plates for Cables without Connectors

With the membrane - based cable entry plates, standard cables with diameters from 1.5 to 22 mm can be quickly routed into control cabinets, panels or machines and be sealed with certified protection class up to IP68 / NEMA type 4X.

In comparison to traditional solutions such as standard cable glands the cable density is greatly increased. This, combined with a reduction of required space make the icotek solution a great choice.

The cable entry plates consist of a robust hard frame made of plastic or metal which is completely moulded with elastomer. At the plate front there are pierceable membranes for various cable diameters, on the back there are conical cable sleeves to ensure a double sealing of the cables. This unique grommet design also provides a good strain relief.

The assembly of the cable entry plates can be done within seconds. Simply put a small slit into the thin membrane and push the cable through.

Our main partner for cable entry systems is Icotek, innovative leader in cable management.

CONFiX Cable Conduit System

 

With CONFiX conduit routing components by Icotek, cables can be easily routed inside parallel corrugated cable conduits. They are perfect for machines, control panels or switch cabinets to ensure a maximum cable protection.

The CONFiX product range consists of bulkhead fittings which are angled at 90°. They can be mounted on machines or enclosure walls. Cable conduits provide protection against mechanical damage as well as various weather conditions.

The liftable cover of the bulkhead fitting CONFiX FWS is fixed by a hinge to the mounting box making the system very easy to mount and equip.

​The corrugated cable conduits CONFiX WS can be used for various applications, depending on the material. icotek offers UV resistant polyamide cable conduits for high mechanical requirements (indoor and outdoor use) and polypropylene conduits with high chemical resistance against acids and alkalis. These cable conduits are available in sizes NW 7.5, 8.5, 10, 13, 17, 23, 29, 37, and 50.

In addition, icotek offers split corrugated conduits CONFiX WST which are designed for pre-terminated cable protection in harsh environments. CONFiX SH mounting clips for quick mounting of split cable conduits round up the product range.

Contact our specialist for this segment

+386 40 755 559

jurij@nexum.si

 

© 2015 - 2019 by Nexum Ltd.